The EZ Grab Rail is a standard stock item that has a set pitch matching the most common step rise and run of 7 over 12 inches. It should be appropriate for most customers that have just one or two small rises/steps. You will need to attach directly to a wall, strong post, or column. As with other EZ Rail products you'll find it surprisingly sturdy. The rail is made from 1-1/2 inch by 3/8 inch steel flat bar and the support bar is strong 1 inch square steel tubing. It weighs in at 10 pounds per railing. This makes the EZ Grab Rail much stronger than other do-it-yourself options. All products are shipped pre-coated with gray primer. You will need to finish paint with a rust proofing paint which a retail paint or hardware store sells. Installation is simple. Set the height to 2 foot 10 inches above the nosing of the step. Mark and drill your holes. Lag into solid wood or use sleeve anchors in block and brick walls. Not recommended for attachment to interior drywall unless you can hit blocking or a stud.